K-1000C m system features:
1、32 to 65536 degree Gray control, Gamma correction procession handle.
2、Support various points, line light source, and all kinds of rules and specifically shaped handle.
3. The controller has one output port, can support up to 512/2048 pixels(DMX lighting support up to 512 pixels).
4、Play content stored in the SD card, the SD card can store up to 32 effects File, SD card capacity support 128MB-32GB.
5、The controller can single set use, also multiple controllers cascades, cascade optical isolation mode: interference, better stability,
cascade distance between two controllers can reach up to 150 meters, need to use a 0.5M² pure copper power cord.
6、The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support
IC through the controller CHIP button, this scheme is more flexible and convenient.
7、For the DMX lighting IC, the controller comes with a write address function; In addition, with the use of our 2016 LedEdit-K V3.26
or later edition can make one key write address function setting.
8、Support load lamp is 4 channels (RGBW) pixels or splits into single-channel point pixels.
9、Enhanced 485 TTL and 485 differential (DMX) signal output.
10、The controller comes with the test effects were as follows: 1 red, green, blue, and black jump; 2 red, green, blue, and black gradient; 3 red, green, blue and goes.
1.If support RGBW four channels’lights should select K-1000-RGBW.
2.If support single-channel t light should choose K-1000-W, at this time, one channel means one pixel , the software effect make as white lighting.
CHIP Switch chip
Press CHIP and then MODE button, can enter write code mode,61 means UCS512-A/B coding;
62 means WS2821 coding; 63 means SM512 coding, 64 means UCS512-C coding
MODE Switch file
SPEED+ Speed up Press SPEED+ and SPEED- the same time, would enter effect files looping mode.