1、32 to 65536 degree Gray control, Gamma correction procession handle.
2、Support various point, line light source, and all kinds of rules and specific shaped handle.
3、The controller has eight ports output, each port can support up to 512/1024 lights(DMX lights can support up to 512 pixels).
4、The playback content stored in SD card, the SD card can store up to 32 files, SD cared capacity supports 128MB-32GB.
5、The controller can single set use,also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5M² pure copper power cord.
6、The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and convenient.
7、For the DMX lighting IC, the controller comes with write address function; In addition, with use of our 2016 LedEdit-K V3.26 or later edition can make one key write address function setting.
8、Support load lamp is 4 channels (RGBW) pixels, or split into single channel point pixels.
9、Enhanced 485 TTL and 485 differential (DMX) signal output.
10、The controller comes with the test effects were as follows: 1 red, green, blue and black jump; 2 red, green, blue and black gradient; 3 red, green, blue and goes.

NOTES:
1.If support RGBW four channels’ lights should select K-8000-RGBW.
2.If support single channel t light should choose K-8000-W, at this time, one channel means one pixe, the software effect make as white lighting.

Button Meaning
SHIP Select chip model Press CHIP and then MODE button, can enter write code mode, 61 means UCS512-A/B coding; 62 means WS2821 coding; 63 means SM512 coding, 64 means UCS512-C coding
MODE Switch files
SPEED+ Speed up Press SPEED+ and SPEED- the same time, would enter effect files looping mode
SPEED- Speed down

Description

K-8000C system features 

1. 32 to 65536 degree Gray control, Gamma correction procession handle.

2. Support various points, line light source, and all kinds of rules and specifically shaped handle.

3. The controller has eight ports output, each port can support up to 512/1024 lights(DMX lights can support up to 512 pixels).

4. The playback content stored in an SD card, the SD card can store up to 32 files, SD cared capacity supports 128MB-32GB.

5. The controller can single set use, also multiple controllers cascade, cascade optical isolation mode: interference, better stability, cascade distance between two controllers can reach up to 150 meters, need to use 0.5M² pure copper power cord.

6. The controller support chip can lock the support IC in software, or not lock the support IC in the software, select the support IC through the controller CHIP button, this scheme is more flexible and convenient.

7. For the DMX lighting IC, the controller comes with a write address function; In addition, with the use of our 2016 LedEdit-K V3.26 or later edition can make one key write address function setting.

8. Support load lamp is 4 channels (RGBW) pixels or split into single-channel point pixels.

9. Enhanced 485 TTL and 485 differential (DMX) signal output.

10. The controller comes with the test effects were as follows: 1 red, green, blue, and black jump; 2 red, green, blue, and black gradient; 3 red, green, blue and goes.

Notes: 1, The controller load lamps 512 points pixel, speed can reach up to 30 frames/sec, 768 point pixel speed can reach up to 25 frames/sec, 1024 point pixel speed is about 22 frames/sec (the above parameter is an example of 1903 agreements, different IC have difference)

2、 International standard DMX512 (1990 agreement) maximum support 512 pixels. When the load is international standard 170  pixels, the speed can reach up to 30 frames/sec, 340 pixels speed is about 20 frames/sec when 512 pixels speed is about 12 frames/sec.

3、Timing (holidays) Play Global Wireless GPS synchronization, control station channel distributor, please contact the salesman or technical support staff for more information.

Support chips(PC Software Select K-8000-RGB)

00: UCS1903,1909,1912,2903,2904,2909,2912TM1803,1804,1809,1812

SM16703,16709,16712;WS2811INK1003;LX3203,1603,1103;GS8205,

8206;SK6812Support up to 1024*8=8192 pixels   

01:SM16716,16726Support up to 1024*8=8192 pixels   

02:P9813Support up to 1024*8=8192 pixels   

03:LPD6803Support up to 1024*8=8192 pixels    

04:LX1003,1203Support up to 1024*8=8192 pixels   

05:WS2801Support up to 1024*8=8192 pixels                 

06:LPD1886Support up to 1024*8=8192 pixels   

07:TM1913Support up to 1024*8=8192 pixels                  

08:TM1914Support up to 1024*8=8192 pixels   

09:P9883, P9823Support up to 1024*8=8192 pixels          

10:DMXSupport up to 512*8=4096 pixels, suggest supporting ≤320*8=2560 pixels

11:DMX 500KSupport up to 512*8=4096 pixels, suggests supporting ≤320*8=2560 pixels

12:DMX 250K-CZF Support up to 512*8=4096 pixels, suggests supporting ≤320*8=2560 pixels

13:DMX 250K-CZF Support up to 512*8=4096 pixels, suggests supporting ≤320*8=2560 pixels

NOTES: 1.If support RGBW four channels lights should select K-8000-RGBW.

      2.If support single-channel light should choose K-8000-W, at this time, one channel means one pixel, the software effect make as white lighting.

Button meaning:

Button Meaning
SHIP Select the chip model Press CHIP and then MODE button, can enter write code mode, 61 means UCS512-A/B coding; 62 means WS2821 coding; 63 means SM512 coding, 64 means UCS512-C coding
MODE Switch files
SPEED+ Speed up Press SPEED+ and SPEED- the same time, would enter effect files looping mode
SPEED- Speed down

 

Reviews

There are no reviews yet.

Be the first to review “K-8000C SPI DMX LED controller with SD card”

Your email address will not be published.

10 + four =