WS2818 LED Strip has a break continue to function that could ensure even one IC is defective, the signal can still pass through. They come in 5-meter reels with a 4-pin JST SM connector on each end. To Power a full roll of this WS2818 LED strip, You must use at least a 12V/10A power supply, do not use higher than 12V or you will destroy the entire strip.



External WS818 IC control. 

Dual signal wires for more reliability (a single LED failure has no effect on other LEDs working on the same unit and the whole light can stay illuminated);

50mm intervals cutting point

Both ends wired with 150mm/5.9″ 20 Awg wire and JST 4 Pin male/female connector

  1. The WS2818 LED strip is addressable light, breakpoint- continue, and can be programmed and controlled with the help of a controller.
  2. Dual signal line version and signal breakpoint continuous transmission. If a LED is damaged, the work of other LEDs will not be affected. 
  3. There is a strong 3M tape backing on the strips, which can be ripped off and stuck to most surfaces.
  4. Each lamp bead forms a ring, which can be arbitrarily cut according to the length of the ring without damaging other convenient fixed and stall parts. The flexible cutting operation makes the structure simple, ultra-thin design, low-temperature light source,  and the selection of the auxiliary material more flexible, energy-saving installation, lower heat, higher brightness, cleaner, lower energy consumption, and more beautiful.
  5. WS2818 is a three-channel LED driver control circuit, which includes intelligent digital port data latching and signals to shape the amplification drive circuit. It also includes a precision internal oscillator and a 12V programmable constant-current control section for highly consistent color effects and stable performance.
  6. WS2818 is similar to WS2811, UCS1903.


– LED type: SMD 5050

– LED quantity: 150 LEDs

– Strip length: 5M(16.4FT)

– LED color: WS2818 IC-RGB(Dream Magic Color)

– Color temperature: R:620-625nm G:515-520nm B:465-470nm

– Lumens: 2000-2500MCD/LED

– FPCB Material: White – Double-sided+Copper

– LED Material: Copper+Gold+Silicone

– Viewing angle: 120°

– Consumption: 30W/5M (6W/M)

– Input: DC 12V

– Storage temperature: -40 ~ +80

– Operating temperature: -25 ~ +45

– Size: L5000*W10*H3mm

– Level : Waterproof-IP65

– Lifetime: 50,000+ hours

Additional information

Weight 0.2 kg
Dimensions 10 × 10 × 10 cm
PCB Color

White PCB


Full color


Non-waterproof IP20, Waterproof IP65, Waterproof IP67



Strip Type

30LED/M, 48LED/M, 60LED/M


There are no reviews yet.

Be the first to review “Dream Magic WS2818 Addressable RGB LED Strip, 12V Dual Signal Transmission, 5m”

Your email address will not be published. Required fields are marked *

seven + 3 =

You may also like…